Brink Flair 400 - Heat Recovery Ventilation 

Low-noise, low energy and high comfort ventilation

 

The Flair 400 is far ahead of its time when it comes to performance, ease of installation and connectivity. The appliance offers more possibilities for occupant and installer alike. It is more efficient and quieter and it uses considerably less energy than any other comparable product.

▪ High Efficient plastic Heat Exchanger >90% efficiency (Holmak TST35)
▪ Constant Flow Fans (EBM) with highly accurate flow measurement using an integral vane anemometer.
▪ Electrical pre-heater with high efficient heat transfer, intelligently controlled
▪ Bypass with servo-motor, 100% airtight due to 2K-technology
▪ Special inside ‘airflow vanes’ to guide the air over the whole heat exchanger
▪ TFT-touch screen with wizards for maintenance and commissioning
▪ 4 adjustable speeds (even activated by touch screen)
▪ Filter/Error signal (24V), and message on display/4-way switch
▪ Condensate connection (fool-proof) with special Ball-Syphon (included) 
▪ Ultra low energy consumption (SFP ~0.15 Wh/m³!)
▪ Ultra low sound level
▪ All components easily removable from the front of the unit
▪ Very airtight foam insulation, stays intact during maintenance and repair
▪ Plus PCB available as post-mounted option
▪ Packaging 100% cardboard, connection covers included for construction period

▪ Control connections - standard model: eBus – Modbus – RJ12 – USB for RF dongle – 24V power supply – 24V signal
▪ Control connections -  PLUS model : (W)LAN Internet – Analogue inputs – Digital inputs 

Flair png.png

The Flair appliance is available in a left-hand and right-hand version. With a left-hand version the “warm” connections (from dwelling 4 and to dwelling 3) are on the left-hand side of the appliance; the condensate discharge is then mounted at the right-hand opening below the appliance. With a right-hand version the “warm” connections (3 & 4) are on the right-hand side of the appliance.

Left-hand version

1 - To outside

2 - From outside

3 - To dwelling

4 - From dwelling

5 - Electrical Connections

6 - Siphon connection

7 - Exhaust air filter

8 - Supply air filter

9 - Mounting

Right-hand version

1 - To dwelling

2 - From dwelling

3 - To outside

4 - From outside

5 - Electrical Connections

6 - Siphon connection

7 - Exhaust air filter

8 - Supply air filter

9 - Mounting

Increased comfort
The Flair 400 is a high-efficiency ventilation appliance that is always, in any situation, capable of supplying the correct quantity of fresh air. In combination with the new system modules for humidifying, purifying, heating and cooling, this will result in increased comfort and a healthy indoor climate That will make you enjoy living in your own home even more.

New standard
The Flair 400 is the second appliance in the Flair series and it has a maximum capacity of 400 m3/h. The appliance is far ahead of its time when it comes to performance, ease of installation and connectivity. That makes it a new standard for heat recovery ventilation. Everything has been scrutinised and that has resulted in an appliance that can be installed more quickly and means more for people. Functionalities that we had become used to from various earlier series, such as a fully automatic bypass and intelligent frost protection, have of course been included in the new design.

Extraordinary performance
All parts of the Flair 400 have been newly developed from scratch. The sophisticated combination ensures excellent performance. The result of an fundamentally improved aerodynamic design: the Flair 400 is more efficient and quieter and it uses considerably less energy than similar products. Measurements show that the energy consumption is some 30 percent lower. The newly developed fans are unique and with their integrated control system they ensure a constant flow of fresh ventilation air.

Brink Flair 400 Installation Manual

Brink Flair 400 Marketing Flyer

Brink Flair 400 Passivhaus Certificate